Cradlepoint COR IBR350 Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Network Hardware Cradlepoint COR IBR350. Cradlepoint COR IBR350 4 pages. Compact, m2m gateway for kiosks, atms & digital signage
Also for Cradlepoint COR IBR350: Quick Start Manual (9 pages)

Print Page
Cradlepoint COR IBR350 Quick Start Manual
Quick Start Guide
/
COR IBR350 Series

GETTING STARTED

Setting Up the Router
+
Purchase a data plan. Then insert the SIM. Re-insert the security screw
if desired.
+
Connect modem antennas (finger tight only).
+
Connect the power adapter to the COR IBR350 and to an electrical outlet.
+
Ensure power is switched on. O = OFF
Access the Administration Pages
To make conguration changes to your router, open the IBR350's GUI-based
administration pages.
1.
Connect to the router via Ethernet.
2.
Open a browser window and type "cp/" or
"192.168.0.1" in the address bar and press
return/enter.
3.
When prompted for the Administrator password,
type the default eight character password found
on the product.
4.
Upon log in for the first time, you are
automatically directed to the First Time Setup Wizard to configure
Admin Password, Time Zone, APN and WAN failure check.
©2005-2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
I = ON
|
cradlepoint.com
FIRST TIME SETUP WIZARD
When you log in to the local administration pages for the first time, you will
be automatically directed to the
First Time Setup
you through basic steps to customize your Cradlepoint IBR350. You have the
ability to configure any of the following:
+
Administrator Password
+
Time Zone
+
Security Mode
To return to the First Time Setup Wizard after your initial login, select
'System > Setup Wizards' on the left navigation bar and First Time Setup in
the dropdown menu.
To restore the router to its factory default settings, press and hold the
RESET button on the side of the device for ten seconds. Reset returns the
login password to the default password and resets all configuration changes.
Wizard, which will walk
+
Access Point Name (APN)
+
Modem Authentication
+
Failure Check
3