Dell Force10 S2410-01-10GE-24P Application Note - Page 4
Browse online or download pdf Application Note for Server Dell Force10 S2410-01-10GE-24P. Dell Force10 S2410-01-10GE-24P 6 pages. Installing the s2410 system
Also for Dell Force10 S2410-01-10GE-24P: Quick Start Manual (31 pages), Manual (42 pages)
Print Page
Using an SSH client, connect to the switch and login to verify that the SSH server is working.
4. Once you have verified that you can connect to the switch with an SSH client, the Telnet server can be disabled
with this command for additional security, if it was enabled. The Telnet server is disabled by default.
SFTOS Version <= 2.2.1
(SFTOS) #no ip telnet server enable
Enabling SSL/HTTPS
1. Generate the SSL certificates using the script in the ssl directory, or copy the example certificates (which end in
.pem) to your TFTP server.
2. Copy the certificates to NVRAM with TFTP as follows from this example, using the IP address of your TFTP
server.
SFTOS #copy tftp://192.168.0.10/dh512.pem nvram:sslpem-dhweak
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.0.10
TFTP Path......................................
TFTP Filename.................................. dh512.pem
Data Type...................................... SSL DH weak
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
TFTP SSL certificate receive complete... updating certificate file...
Certificate file transfer operation completed successfully
SFTOS #copy tftp://192.168.0.10/dh1024.pem nvram:sslpem-dhstrong
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.0.10
TFTP Path......................................
TFTP Filename.................................. dh1024.pem
Data Type...................................... SSL DH strong
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
TFTP SSL certificate receive complete... updating certificate file...
Certificate file transfer operation completed successfully
SFTOS #copy tftp://192.168.0.10/server.pem nvram:sslpem-server
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.0.10
TFTP Path......................................
TFTP Filename.................................. server.pem
Data Type...................................... SSL Server cert
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
TFTP SSL certificate receive complete... updating certificate file...
S-Series Secure Management
SFTOS (Config)#no ip telnet server enable
- 4 -
SFTOS Version >= 2.3.1