Dell Force10 S2410-01-10GE-24P Manual - Page 9
Browse online or download pdf Manual for Server Dell Force10 S2410-01-10GE-24P. Dell Force10 S2410-01-10GE-24P 42 pages. Installing the s2410 system
Also for Dell Force10 S2410-01-10GE-24P: Application Note (6 pages), Quick Start Manual (31 pages)
Print Page
System Status
S2410 status data can be derived in several ways, including physical LED displays, discussed next, along
with boot menu options, CLI
details on those options, see the S2410 Quick Reference, the SFTOS Command Reference (SFTOS 2.4),
and the SFTOS Configuration Guide (SFTOS 2.4).
LED Displays
As shown in
Figure 2-1 on page
the front panel. Those indicators are explained in
are described in
Table 2-2 on page
The following table describes the LED status indicators on the left side of the front panel.
Table 2-1. Status Panel LED Display
LED Label
LED Color
System
Off
Green Blinking
Green
Red
Alarm
Off
Amber
Red
PSU A
Off
and
Green
PSU B
Red
Table 2-2. Port LED Displays
Feature
10G Ports
Ethernet Management Port
10/100 Ethernet
(labeled
(commonly called the service
port)
show
commands, SNMP traps, and the SFTOS Web User Interface. For
7, the S2410 contains a set of system status indicators on the right side of
9.
Description
Unit is powered off.
Unit is booting up (blinking rate is 1 Hz).
Unit is operational
Error during boot
No alarm
Minor alarm: Fan or temperature is outside acceptable range
Major alarm
PSU not present
PSU present and OK
Red could mean that the PSU is present but failed, or that one power cord that used to
be connected is now disconnected.
The syslog message indicates "AC Power removed or fault detected."
Description
Link LED (upper left side of each port except 1 and 2):
Green — Link up on this port
Off — No Link detected at this port
Activity LED (lower left side of each port except 1 and 2)
Blinking Green — Activity, transmitting or receiving packet at this port.
Off — No activity
Link LED (lower left side of port):
)
Green — 100BaseT Link up on this port (1000 is not guaranteed.)
Off — No Link detected at this port
Activity LED (lower right side of port)
Blinking Green — Activity, transmitting or receiving packet at this port.
Off — No activity
Table
2-1. Also, each port has status indicators, which
The S2410 System
|
9