Dell Force10 S25V Quick Start Manual - Page 22
Browse online or download pdf Quick Start Manual for Server Dell Force10 S25V. Dell Force10 S25V 27 pages.
Print Page
Task
Configure a
management route to
the network from
which you are
accessing the system.
Configure a Username and Password
In FTOS, you can assign a specific username to limit user access to the system.
Task
Configure a username
and password to
access the system
remotely.
Configure the Enable Password
The EXEC Privilege mode is accessed by the enable command. Configure a
password as a basic security measure. When using a console connection, EXEC
Privilege mode is unrestricted by default; it cannot be reached by a VTY
connection if no password is configured. There are two types of enable
passwords:
•
enable password stores the password in the running/startup configuration
using a DES encryption method.
•
enable secret is stored in the running/startup configuration in using a
stronger, MD5 encryption method.
Dell Force10 recommends using the enable secret password.
Task
Create a password to
access EXEC
Privilege mode.
20
Installing the Software
Command Syntax
management route ip-address/mask
gateway
Command Syntax
username name [access-class access-list-
name] [nopassword | password
[encryption-type] password] [privilege
level]
Command Syntax
enable [password | secret] [level level]
[encryption-type] password
Command Mode
CONFIGURATION
Command Mode
CONFIGURATION
Command Mode
CONFIGURATION