Dell PowerEdge 2410 Manual - Page 5

Browse online or download pdf Manual for Server Dell PowerEdge 2410. Dell PowerEdge 2410 12 pages. Cabling poweredge t610
Also for Dell PowerEdge 2410: Manual (20 pages), Manual (20 pages), Manual (17 pages), Manual (12 pages), Manual (10 pages), Manual (10 pages), Manual (9 pages), Manual (9 pages), Manual (10 pages), Manual (11 pages), Manual (8 pages)

Print Page

Cable Routing Procedures for Dell™ PowerEdge™ R415 Systems

1.2 Installing the Inner CMA Attachment Bracket

As described in the

Rack Installation Instructions,

attachment bracket based on which side you wish to mount the CMA. Use the bracket marked "A" for

mounting the CMA on the left side, and the bracket marked "B" for mounting on the right side. See

Figure 2.

Figure 2: Attaching the Inner CMA Attachment Bracket

1.3 Routing the Power Cables Through the Strain Reliefs

After you have installed the tray and cables, route the power cables through the strain reliefs located

on the power supply handles as shown in Figure 3.

Figure 3: Routing Power Cables Through the Strain Reliefs

1.4 Routing the Cables Through the CMA

The CMA can be installed on either the rear right or rear left side of the rails. Mounting the CMA on the

side that is opposite of the power supplies (left-side mount) is recommended; otherwise, the CMA

must be partially disconnected in order to remove the power supplies. Refer to Section 3 for details on

power supply replacement.

locate and attach the appropriate inner CMA

Page 3