Dell PowerEdge 2550 Rack Installation Instructions - Page 26

Browse online or download pdf Rack Installation Instructions for Server Dell PowerEdge 2550. Dell PowerEdge 2550 40 pages. Wake-on-lan (wol) support on dell servers
Also for Dell PowerEdge 2550: Installation Manual (26 pages), Install Manual (32 pages), Configuration Manual (10 pages), Activation Manual (32 pages), Installation Manual (32 pages), Manual (28 pages), Manual (15 pages)

Print Page
Dell PowerEdge 2550 Rack Installation Instructions
Installing the Cable Management Arm
Facing the back of the two-post rack, locate the two slots and the threaded hole on the
1
back right side of the system.
Insert the bracket on the end of the cable management arm to the mating slots and
2
threaded hole, and secure the arm using the captive thumbscrew.
F i g u r e 1 - 1 6 . I n s t a l l i n g t h e C a b l e M a n a g e m e n t A r m
Align the free end of the cable-management arm (the end with the half-hinge) to the
3
hinge-half mate on the back-right side (as viewed from the back) of the system
(see Figure 1-16).
Squeeze the quick-disconnect knobs on the free end of the cable-management arm
4
and align the two hinge halves to attach the arm to the bracket on the back of the
system chassis (see Figure 1-16).
Attach the input/output (I/O) cables to their respective expansion cards on the back of
5
the system.
1-20
Rac k I n st allat io n G uide
quick-disconnect knobs
captive
thumbscrew