Dell POWEREDGE 4300 Installation Manual - Page 17

Browse online or download pdf Installation Manual for Server Dell POWEREDGE 4300. Dell POWEREDGE 4300 28 pages. System board upgrade
Also for Dell POWEREDGE 4300: Installation Information (6 pages), Rack Installation (37 pages), Upgrade Installation Manual (14 pages), Rack Installation (34 pages), Upgrade Manual (23 pages), Upgrade Manual (24 pages), Installation Instructions Manual (12 pages), Replacement Manual (3 pages), Installation Information (6 pages), Installation Manual (14 pages)

Print Page
Dell POWEREDGE 4300 Installation Manual
support.dell.com
vertical rail
10-32 x 0.5-inch
screws (2)
front of rack

Figure 1-9. Removing the Slide Assemblies

2.
Repeat step 1 to remove the slide mounting screws at the back of the rack.
3.
Lift the slide assembly out of the rack and place it out of the way.
Repeat this step to remove the slide assembly on the opposite side of the rack.
4.
To remove the cage nuts (used to secure the rack-adapter thumbscrews) from
each vertical rail, use a flat-blade screwdriver or the cage-nut installation tool
(if available), pry down on the outside top edge of the cage nut while pushing
inward on the cage nut to remove it from the vertical rail (see step 3 in
Figure 1-10).
Repeat this step to remove the remaining cage nuts.
5.
Package all the rack installation hardware you removed and label it for future use.
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
slide-assembly
mounting-bracket
flange
alignment
marks
slide
assemblies (2)
slide alignment screws
1-11