Dell PowerEdge 4350 Upgrade Manual - Page 16
Browse online or download pdf Upgrade Manual for Server Dell PowerEdge 4350. Dell PowerEdge 4350 23 pages. Dell poweredge 4350 system upgrade installation guide
Also for Dell PowerEdge 4350: Rack Installation (35 pages), Upgrade Manual (24 pages), Installation Manual (34 pages), User Manual (35 pages)
Print Page
support.dell.com
microprocessor
!
!" #
!
$
%
To remove the guide bracket assembly, perform the following steps:
1.
Remove any terminator card installed in the guide bracket.
2.
Remove any microprocessor assembly installed in the guide bracket.
3.
Use a #2 Phillips screwdriver to loosen the four captive nuts that secure the
guide bracket assembly to the system board (see Figure 1-5).
4.
Lift up the assembly to remove it from the four threaded posts.
To install the new guide bracket assembly, perform the following steps:
1.
Position the guide bracket over the four threaded posts (see Figure 1-6).
You can install the guide bracket only one way (the captive nuts will not align
with the threaded posts if installed incorrectly).
2.
Tighten the four captive nuts using a #2 Phillips screwdriver.
Dell PowerEdge Systems — Microprocessor Upgrade
release latches (2)
thumbscrews (2)
heat sink
1-13