Dell PowerEdge 4400 Installation Manual - Page 7

Browse online or download pdf Installation Manual for Server Dell PowerEdge 4400. Dell PowerEdge 4400 42 pages. Wake-on-lan (wol) support on dell servers
Also for Dell PowerEdge 4400: Installation Manual (20 pages), Installation Manual (28 pages), Rack Installation (37 pages), Update Manual (8 pages), Information Update (8 pages), User Manual (42 pages), Rack Installation (34 pages), Hardware Installation Manual (40 pages), Installation Manual (36 pages), Manual (15 pages)

Print Page

(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\opal\ts\Romb\8648Reb0.fm

support.dell.com

DIMM socket

ejectors (2)

alignment

keys (2)

Figure 1-2. Installing a DIMM

Align the RAID DIMM's edge connector with the slot in the center of the DIMM

socket, and insert the DIMM in the socket (see step A in Figure 1-2).

The DIMM socket has two alignment keys that allow the DIMM to be installed in

the socket in only one way.

NOTE: The RAID controller DIMM must be an unbuffered DIMM, rated to run at

100 megahertz (MHz) or faster. Do not substitute registered DIMMs such as

those used for system memory.

Press down on the DIMM with your thumbs while pulling up on the ejectors with

your index fingers to lock the DIMM into the socket (see step B in Figure 1-2).

7 .

Install the RAID hardware key.

Insert the hardware key into the socket (see Figure 1-1) and secure the key with

the latches on each end of the socket (see Figure 1-3). The key is designed so

that you can only insert it one way and is labeled "PE4400."

DELL CONFIDENTIAL - Preliminary

1/14/00

Dell PowerEdge 4400 Systems—Activating the PERC 3/Di

1-3