Dell PowerEdge 6800 Troubleshooting Manual - Page 14

Browse online or download pdf Troubleshooting Manual for Server Dell PowerEdge 6800. Dell PowerEdge 6800 16 pages. Installation and troubleshooting guide (.htm)

NOTICE:
carrier, be careful not to damage the system identification switch. See Figure 1-6.
Using a #2 Phillips screwdriver, install the two screws that secure the LCD board to the
h
replacement bracket.
Figure 1-6. Replacing the Control Panel Assembly Metal Bracket
tabs (3)
front plate
3 Install the control panel assembly:
Connect the interface cables to the control panel assembly.
a
Position the control panel assembly with the panel cutouts on the back of the rack front
b
panel.
Using a #2 Phillips screwdriver, install the three screws (that came with your kit).
c
4 Connect any cables to the devices previously removed from the media bay.
5 Reinstall the media bay devices, hard drives, and filler plates into the system.
NOTE:
positions that they were removed from. The devices should be labeled appropriately.
6 Install the top cover. See Figure 1-4.
14
Tower-to-Rack Conversion Guide
The system identification switch is very fragile. When aligning the LCD board on the rack
Ensure that the hard drives, any optical drives, and devices are reinstalled into the same
I/O board
screws (3)
LCD board
system identification switch
control panel bracket