Dell PowerEdge M605 Use Manual - Page 20

Browse online or download pdf Use Manual for Server Dell PowerEdge M605. Dell PowerEdge M605 44 pages. Using dell blade servers in a dell poweredge high availability cluster
Also for Dell PowerEdge M605: Update Manual (44 pages), Update Manual (21 pages), Update Manual (14 pages), Installation Manual (7 pages)

Dell PowerEdge M605 Use Manual

Cluster Nodes

Table 1-4 lists the hardware requirements for the server modules in the
PowerEdge server enclosure.
Table 1-4. Cluster Node Requirements
Component
Cluster nodes
RAM
Fibre Channel
mezzanine card
iSCSI mezzanine
card
Gigabit Ethernet
(cluster networks)
RAID controller
(optional)
20
Introduction
Minimum Requirement
Two to eight PowerEdge server modules running the appropriate
Windows Server 2003 operating system edition as described in
Table 1-1
At least 512 MB of RAM installed per server module
If the cluster is configured with a Fibre Channel shared storage
system, at least one dual-port Fibre Channel mezzanine card per
server module
If the cluster is configured with an iSCSI shared storage system,
at least one dual-port Gigabit Ethernet mezzanine card per
server module
At least two Gigabit Ethernet interfaces per server module
One controller connected to two internal hard drives for each
server module in a RAID 1 configuration
NOTE:
It is strongly recommended that you use hardware-based
RAID or software-based disk-fault tolerance for the internal drives.