Dell PowerEdge M910 Getting Started Manual - Page 6

Browse online or download pdf Getting Started Manual for Server Dell PowerEdge M910. Dell PowerEdge M910 12 pages. M-series blade servers
Also for Dell PowerEdge M910: Update Manual (44 pages), Update Manual (21 pages), Update Manual (14 pages), Installation Manual (7 pages), Update Manual (28 pages), Getting Started Manual (12 pages), Technical Manual (46 pages), Portfolio Manual (27 pages), Technical Manual (45 pages), Getting Started Manual (14 pages), Getting Started Manual (12 pages), Technical Manual (49 pages)

Print Page
Dell PowerEdge M910 Getting Started Manual
Connecting The System To Power
Figure 6. Connecting Power to the System
Connect the system's power cables to the system power supplies.
CAUTION: To prevent the power cables from being disconnected accidentally, use the plastic clip on each power
supply to secure the power cable to the power supply, and use the strap to secure the power cable to the strain-
relief bar.
CAUTION: Do not plug the power cables directly into a power outlet; you must use a PDU. For optimal system
functionality, a minimum of three power supplies are required.
Plug the other end of the power cables into a power distribution unit (PDU).
NOTE: The power supply units must have the same maximum output power.
Turning On The Enclosure
Figure 7. Enclosure Power Button
Press the power button on the enclosure. The power indicator should light.
NOTE: Once you have connected the system to the power supplies, there may be a minimal delay before you can
turn on your system.
6