Dell PowerEdge PDU Managed LED Manual - Page 3

Browse online or download pdf Manual for Server Dell PowerEdge PDU Managed LED. Dell PowerEdge PDU Managed LED 9 pages. Site planning guide
Also for Dell PowerEdge PDU Managed LED: Manual (20 pages), Manual (20 pages), Manual (17 pages), Manual (12 pages), Manual (10 pages), Manual (10 pages), Manual (9 pages), Manual (9 pages), Manual (10 pages), Manual (12 pages), Manual (12 pages), Manual (11 pages), Manual (8 pages), Manual (11 pages), Manual (11 pages), Manual (11 pages), Site Planning Manual (8 pages)

Print Page

Cable Routing Procedures for the Dell PowerEdge T320 & T420 Systems

Contents

Introduction ............................................................................................................. 4

Section 1: Cabling a PowerEdge T320 & T420 system with a CMA ............................................. 4

1.1.

Connecting the cables to the system ................................................................... 4

1.2.

Routing the power cables through the strain reliefs ................................................. 5

1.3.

Installing the CMA .......................................................................................... 6

Section 2: Replacing a hot swap power supply on a PowerEdge T320 & T420 system with a CMA ...... 8

2.1.

Replacing a hot swap power supply with a left-side mounted CMA ............................... 8

2.2.

Replacing a hot swap power supply with a right-side mounted CMA ............................. 8

Section 3: Cabling a PowerEdge T320 & T420 system without a CMA ........................................ 9

Figures

Figure 1.

System with cables installed ............................................................................. 5

Figure 2.

Routing power cables through the strain reliefs on hot swap power supplies .................. 5

Figure 3.

Routing the power cable through the strain relief on a fixed power supply .................... 5

Figure 4.

Left-side mounted CMA installation (preferred) ...................................................... 6

Figure 5.

Right-side mounted CMA installation (CMA shown in service position) ........................... 7

Figure 6.

Replacing a hot swap power supply ..................................................................... 8

Figure 7.

Cable routing without a CMA ............................................................................. 9