Dell PowerEdge R640XL Configuration Manual - Page 20
Browse online or download pdf Configuration Manual for Server Dell PowerEdge R640XL. Dell PowerEdge R640XL 27 pages. Security analytics gen14 dell hardware by symantec
Print Page
Under Retrieve License, enter the License Key and click Send Request.
If applicable, select the license type.
The server sends the license key and license seed file to the Symantec license server, which generates the license file
(license.tgz) and returns it to the server, which automatically reboots.
4. If your server does not have Internet access, do the following:
Click Download DS Seed to download the seed file (dsseed.tgz) to your workstation.
On a workstation with Internet access, go to:
Type the server's license key, upload dsseed.tgz, and click Submit.
If applicable, select the license type and click Submit.
Save the license file (license.tgz) to the workstation.
Return to the License Details dialog, click Browse, and select license.tgz. The license is uploaded and the server
automatically reboots.
5. Once the server has rebooted, select About > License Details to verify the license.
6. Click Download to save an archive copy of the license file (license.tgz). Store this file in a secure location that is not on
the server.
Configure Network Settings for the Storage Array
Network settings for storage arrays must be configured before they can communicate with Sensors. If this has already been
done per the instructions on the Security Analytics Gen14 Dell Storage Quick Start Guide, it need not be done again. Network
settings for expansion enclosures do not need to be configured.
1. Connect an Ethernet cable to the storage array's Network port on Controller A. Connect the other end of the cable to
a laptop with an IP address of 10.0.0.1/24 and a default gateway address of 10.0.0.2.
2. Open a browser and go to:
3. Select the User Language and click Get Started.
4. Enter a Username and Password and click Apply and Continue. The Username will be required when configuring the
storage array's disk and filesystem for Capture and Indexing.
5. When prompted with the Welcome screen, click System Settings.
6. Configure the Controller A settings for IP Address, IP Mask, and Gateway.
7. Configure the Controller B settings for IP Address, IP Mask, and Gateway.
8. Click Apply and Close and proceed to configuring the storage array from the Security Analytics server's CLI.
license.soleranetworks.com
https://10.0.0.2
Security Analytics
Configuration Guide
Gen14 Dell Hardware
20