Dell POWEREDGE R710 Manual - Page 6

Browse online or download pdf Manual for Server Dell POWEREDGE R710. Dell POWEREDGE R710 9 pages. Poweredge series
Also for Dell POWEREDGE R710: User Manual (28 pages), Documentation Update (14 pages), Information Update (14 pages), Information Update (38 pages), Update Manual (14 pages), Update Manual (14 pages), Portfolio Manual (27 pages), Specifications (2 pages)

Print Page
Dell POWEREDGE R710 Manual
Cabling the Dell™ PowerEdge™ R710 
 
Figure 3:  Routing the Cables Through the CMA 
 
 
 
 
 
 
 
 
 
NOTE: Do not store excess
cable slack inside the CMA.
 
The cable may protrude
through the CMA causing
 
binding and potentially
damaging the cable.
 
3. Once all the cables are routed through the CMA, dress the cables between the back of the system and the 
entrance of the CMA with the tie wraps provided in the CMA kit. The tie wraps are shown in yellow in all 
illustrations. 
4. Clip off the excess length of material from the tie wraps and make sure that the tie wraps are positioned to 
avoid interference with adjacent systems.  
5. Return the CMA to the closed (retracted) position. 
6. Extend the system from the rack to verify there is sufficient slack in the cables at both the entrance and exit of 
the CMA. 
7. See Figure 4 for an example of a completed left side mounted CMA installation. 
 
 
Cables entering CMA should
have a small amount of slack
to avoid cable strain when
CMA is extended.
Page 4