Dell PowerVault DL4000 Handbook - Page 20
Browse online or download pdf Handbook for Server Dell PowerVault DL4000. Dell PowerVault DL4000 28 pages. Setting up your dell powervault dl4000 backup to disk appliance
Also for Dell PowerVault DL4000: Deployment Manual (22 pages), Release Note (11 pages), Getting Started Manual (10 pages), Manual (4 pages), Manual (2 pages), Getting Started With Your System (2 pages)
Print Page
Table 10. Resetting Your PowerVault 110T LTO Tape Drive
Drive Type
Dell PowerVault
110T LTO3-060
(Tandberg)
Dell PowerVault
110T LTO3-080
(IBM)
Dell PowerVault
110T LTO4-120
Dell PowerVault
110T LTO4-
120HH
Dell PowerVault
110T LTO5-140
NOTE:
It may take up to 20 minutes for a tape cartridge to fully rewind and eject.
20
LTO Media Handbook
Device Reset Procedure
Press and hold the Eject button for six seconds. The drive enters
1
service mode and all the LEDs flash slowly.
Press Eject twice. The Activity LED flashes fast.
2
Double-click the Eject button.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
(continued)