Dell 1700 - Personal Laser Printer B/W User Manual - Page 14
Browse online or download pdf User Manual for Monitor Dell 1700 - Personal Laser Printer B/W. Dell 1700 - Personal Laser Printer B/W 24 pages. Dell vostro setting up
Also for Dell 1700 - Personal Laser Printer B/W: Quick Setup Manual (2 pages), Quick Setup (2 pages), Features (2 pages), Owner's Manual (50 pages)
Print Page
1700FP-E.book Page 8 Monday, November 2, 1998 4:51 PM
Automatic Save
Whenever you open the on-screen menu and allow an adjustment window to remain
on-screen for about three seconds without pressing another button, this monitor automati-
cally saves any adjustments you have made. These changes are saved into a user area in
the monitor. User areas are reserved according to the signal frequency from your com-
puter. This monitor can save adjustments for up to five user modes. It has ten factory
preset or preload modes, one for each signal frequency as listed in the "Preset timing
modes" on page 16.
If you have made no adjustments, the on-screen menu disappears and the monitor does
not save anything.
Direct-Access Features
The features described on this page can be accessed quickly, at the touch of one button.
Once you are finished making adjustments to a feature, push the EXIT button to turn off
the menu.
Contrast
Contrast
–
: Exit
Brightness
Brightness
6
: Exit
Auto Adjustment
Auto Adjustment
No
–
: Exit
®
1-8
Dell
1700 Flat Panel Monitor User's Guide
Follow these instructions to adjust the contrast between dark-
ness and lightness on the monitor's display.
16
1. With the menu off, push the "–" or "+" button. The
+
contrast display will appear.
2.
Push the "+" button to increase the contrast; push
the "− − " button to decrease the contrast.
Follow these instructions to adjust the brightness of the moni-
tor's display.
44
1. With the menu off, push the " "6" " or " "5" " button. The
5
brightness display will appear.
2.
Push the " "5" " button to increase the brightness;
push the " " 6" " button to decrease the brightness.
Follow these instructions to enable or disable the automatic
screen adjustments for your monitor.
Yes
+
1. With the menu off, push the EXIT button. The auto-
matic adjustment display will appear.
2.
Follow the directions previously given on page 5.