Dell 3007WFP - UltraSharp - 30" LCD Monitor User Manual - Page 5
Browse online or download pdf User Manual for Monitor Dell 3007WFP - UltraSharp - 30" LCD Monitor. Dell 3007WFP - UltraSharp - 30" LCD Monitor 26 pages. User guide
Also for Dell 3007WFP - UltraSharp - 30" LCD Monitor: Manual (24 pages)
NOTE: Pin 1 is at the top right.
The following table shows pin assignments in the DVI connector:
Pin Signal Assignment
Pin Signal Assignment
1
T.M.D.S. Data 2-
9
2
T.M.D.S. Data 2+
10 T.M.D.S. Data 1+
3
T.M.D.S. Data 2/4 Shield 11 T.M.D.S. Data 1/3 Shield 19 T.M.D.S. Data 0/5 Shield
4
T.M.D.S. Data 4-
12 T.M.D.S. Data 3-
5
NT.M.D.S. Data 4+
13 T.M.D.S. Data 3+
6
DDC Clock
14 +5V Power
7
DDC Data
15 Ground (for +5V)
8
No Connect
16 Hot Plug Detect
Universal Serial Bus (USB) Interface
This monitor supports High-Speed Certified USB 2.0 interface.*
USB ports:
1 upstream - rear
l
4 downstream - 2 on rear; 2 on left side
l
NOTE: USB 2.0 capability requires 2.0 capable computer.
NOTE: Monitor's USB interface works ONLY when monitor is Powered ON (or in Power Save Mode). Switching your monitor OFF and then ON would re-
enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended
Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
Most monitor installations are automatic; you can select different settings, if desired.
Card Reader Specifications
Overview
The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
l
The Flash Memory Card Reader is automatically recognized by Windows® 2000, XP and Vista.
l
Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
l
All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
l
Features
The Flash Memory Card Reader has the following features:
Supports Windows 2000, XP and Vista operating systems.
l
Pin Signal Assignment
T.M.D.S. Data 1-
17 T.M.D.S. Data 0-
18 T.M.D.S. Data 0+
20 T.M.D.S. Data 5-
21 T.M.D.S. Data 5+
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock +
24 T.M.D.S. Clock -
Data Rate Power Consumption
High speed 480 Mbps
2.5W (Max., each port)
Full speed
12 Mbps
2.5W (Max., each port)
Low speed
1.5 Mbps
2.5W (Max., each port)