Dell E198FP User Manual - Page 23

Browse online or download pdf User Manual for Monitor Dell E198FP. Dell E198FP 36 pages. Dell e198fp: quick start
Also for Dell E198FP: Setup Manual (2 pages)

Print Page
Dell E198FP User Manual
A
MENU
B
Brightness/Contrast Hot
Key
B
C
- and + buttons
C
Auto Adjust
D
Power Button & Indicator
 
On Screen Menu/Display (OSD)
Direct-Access Functions
Function
Auto adjustment   
 
 
Brightness / Contrast
 
 
Downloaded from ManualMonitor.com Manuals
The 'MENU' button is used to open the on-screen display (OSD), select function icons, exit from menus and sub-menus, and
to exit the OSD. See
Accessing the Menu System.
Use this button for direct access to the 'Brightness' and 'Contrast' control menu.
Use these buttons to adjust (decrease/increase ranges) items in the OSD. 
 
 
NOTE:
You can activate automatic scroll feature by pressing and holding either + or - button.
Use this button to activate automatic setup and adjustment. The following dialog will appear on screen as the monitor self-
adjusts to the current input: 
Auto Adjustment
button allows the monitor to self-adjust to the incoming video signal. After using 'Auto Adjustment',
you can further tune your monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD.
NOTE:
Auto Adjust will not occur if you press the button while there are no active video
input signals, or attached cables.
The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode. 
The Power button turns the monitor on and off.
Adjustment Method
Use this button to activate automatic setup and adjustment. The following dialog will appear on
screen as the monitor self-adjusts to the current input: 
Auto Adjustment
using Auto Adjustment, you can further tune your monitor by using the Pixel Clock and Phase
controls in the OSD.
NOTE:
Auto Adjust will not occur if you press the button while there are no active video input
signals, or attached cables.
With the menu off, push
The Brightness function adjusts the luminance of the flat panel.
Adjust 'Brightness' first, then adjust 'Contrast' only if further adjustment is necessary.
"+" increase 'brightness'
" - "decrease 'brightness'
The Contrast function adjusts the degree of difference between darkness and lightness on the
display screen. 
"+" increase the 'contrast'
"-" decrease the 'contrast'
       Auto Adjust In Progress
Auto Adjust In Progress
button allows the monitor to self-adjust to the incoming video signal. After
button to display the 'Brightness' and 'Contrast' adjustment menu.