Dell E198FP User Manual - Page 31

Browse online or download pdf User Manual for Monitor Dell E198FP. Dell E198FP 36 pages. Dell e198fp: quick start
Also for Dell E198FP: Setup Manual (2 pages)

Print Page
Dell E198FP User Manual
Shaky/Jittery Video
Missing Pixels
Stuck-on Pixels
Brightness Problems
Geometric Distortion
Horizontal/Vertical Lines
Sync Problems
LCD Scratched
Safety Related Issues
Intermittent Problems
Missing Color
Wrong Color
Image retention from a static image left
on the monitor for a long period of time   
 

Product Specific Problems

SPECIFIC SYMPTOMS
Screen image is too small
Cannot adjust the monitor with
the buttons on the front panel
Downloaded from ManualMonitor.com Manuals
Wavy picture or fine movement
LCD screen has spots
LCD screen has bright spots
Picture too dim or too bright
Screen not centered correctly
Screen has one or more lines
Screen is scrambled or appears
torn
Screen has scratches or smudges
Visible signs of smoke or sparks
Monitor malfunctions on & off
Picture missing color
Picture color not good
Faint shadow from the static
image displayed appears on the
screen
WHAT YOU EXPERIENCE
Image is centered on screen, but does not fill entire
viewing area
OSD does not appear on the screen
Push Auto Adjust button
l
Adjust Phase and Clock controls via OSD
l
Perform monitor reset
l
Check environmental factors
l
Relocate and test in another room
l
Cycle power on-off
l
These are pixels that are permanently off and is a natural defect
l
that occurs in LCD technology
Cycle power on-off
l
These are pixels that are permanently on and is a natural defect
l
that occurs in LCD technology
Perform monitor reset on "All Settings"
l
Push Auto Adjust button
l
Adjust brightness & contrast controls
l
Perform monitor reset on "Position Settings Only"
l
Push auto-adjust button
l
Adjust the centering controls
l
Ensure monitor is in proper video mode
l
Perform monitor reset on "All Settings"
l
Push Auto Adjust button
l
Adjust Phase and Clock controls via OSD
l
Perform monitor self-test feature check and determine if these lines
l
are also in self-test mode
Check for bent or broken pins
l
Perform monitor reset on "All Settings"
l
Push Auto Adjust button
l
Adjust Phase and Clock controls via OSD
l
Perform monitor self-test feature check to determine if scrambled
l
screen appears in self-test mode
Check for bent or broken pins
l
Boot up in the "safe mode"
l
Turn monitor off and clean the screen
l
For cleaning instruction, see
Cleaning for Your
l
Do not perform any troubleshooting steps
l
Monitor needs to be replaced
l
Ensure monitor is in proper video mode
l
Ensure video cable connection to computer and to the flat panel is
l
secure
Perform monitor reset on "All Settings"
l
Perform monitor self-test feature check to determine if the
l
intermittent problem occurs in self-test mode
Perform monitor self-test feature check
l
Check connection integrity at both end of the video cable
l
Check for bent or broken pins
l
Change the color to "User Preset"
l
Adjust R/G/B value of "User Preset"
l
Use the Power Management feature to turn off the monitor at all
l
times when not in use. Alternatively, use a dynamically changing
screensaver
In OSD Menu, under Reset to Factory Settings, select Enable LCD
l
Conditioning. Using this option may take several hours before the
image is eliminated
NOTE: Image Burn-in is not covered by your warranty.
POSSIBLE SOLUTIONS
Perform monitor reset on "All Settings"
l
Turn the monitor off and unplug the power
l
cord and then plug back and power on
Monitor.