Dell UltraSharp 2208WFP User Manual - Page 18

Browse online or download pdf User Manual for Monitor Dell UltraSharp 2208WFP. Dell UltraSharp 2208WFP 31 pages. Aio flat panel monitor for dell optiplex sff computer
Also for Dell UltraSharp 2208WFP: Setup Manual (2 pages), Manual (41 pages)

Print Page

1. Usb Ports

Other Setting

submenu

Back

Push

Language

Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, or Japanese).

This function is used to adjust the OSD background from opaque to transparent.

Transparency

Menu Timer

OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.

Use the

Menu Lock

Controls user access to adjustments. When 'Lock'

button.

NOTE:

selected on entry. Press and hold

Rotates the OSD by 90 degrees counter-clockwise. Your can adjust the menu according to your

Rotation

Audio

To turn on or off audio power during power save mode.

Options

Default is "Enable". Select Disable to disable this feature.

Yes — Turn off audio power during power save mode.

No — Turn on audio power during power save mode.

DDC/CI

DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable

via software on your PC. You can disable this feature by selecting "Disable".

Enable this feature for best user experience and optimum performance of your monitor.

LCD

If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD

Conditioning

Conditioning feature may take several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature

does not remove burn-in.

NOTE:

Factory

Reset all OSD settings to the factory preset values.

Reset

to go back to the main menu.

and

buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.

When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre-

button for 15 seconds to unlock and allow user access to all applicable settings.

Use LCD Conditioning only when you experience a problem with image retention.

is selected, no user adjustments are allowed. All buttons are locked except

Display

Rotation.