Dell W2600 Owner's Manual - Page 41

Browse online or download pdf Owner's Manual for Monitor Dell W2600. Dell W2600 49 pages. 26” lcd tv
Also for Dell W2600: Setting Up (2 pages), (Spanish) Setup Manual (2 pages)

Print Page

Using the Self-Test Feature When Your TV is Connected to

Your Computer

When your computer is connected to the TV through DVI or VGA connector you can use the self-

test feature to check whether your TV is functioning properly. If your TV and computer are

properly connected but the TV screen remains dark, run the TV self-test by performing the

following steps:

Turn off both your computer and the TV.

Unplug the video cable from the back of the computer.

Turn on the TV.

If the TV cannot sense a video signal and is working correctly, the floating "Dell - Self-Test

Feature Check" dialog box appears on the screen (against a black background).

While in self-test mode, the power light remains green and the self-test pattern scrolls

through the screen continually. This box also appears during normal system operation if the

video cable becomes disconnected or damaged.

Turn off your TV and reconnect the video cable; then turn on both your computer and the

TV. If your TV screen remains blank, the problem may be with your computer or graphic card.

See your computer documentation for more information.

Problems When Using the TV as a Monitor

NOTE:

You can only connect your computer to the TV using a VGA connector.

Problem

The picture is off-centered or too small

Troubleshooting Your TV

Possible Solution

Use Auto Adjust to check the Image Settings.

Press Menu to enter the OSD, select Image

Settings, and then select Auto Adjust.

Check the optimal resolution settings.

You may need to download a new video driver. For

more information, go to support.dell.com.

NOTE:

Some older video cards may not support the

resolution settings for the TV.