Dell E11J Owner's Manual - Page 14
Browse online or download pdf Owner's Manual for Storage Dell E11J. Dell E11J 45 pages. Storage center
Also for Dell E11J: Getting Started Manual (7 pages), Owner's Manual (39 pages)
Print Page
Item Control/Feature
5
SAS activity indicators
6
Storage controller
module status
7
Recessed power off
button
8
Storage controller
module fault
9
Recessed reset button
10
Identification LED
11
USB port
12
Diagnostic LEDs (8)
13
Serial port (3.5 mm mini
jack)
14
Four or two iSCSI ports
with two LEDs per port
15
Mini-SAS port B
16
Mini-SAS port A
14
Icon Description
NOTE: To use the RELP port as a front-end connection to
host servers, a Flex Port license is required.
—
•
Off: Port is off
•
Steady green: Port is on, but without activity
•
Blinking green: Port is on and there is activity
On: Storage controller completed POST
Powers down the storage controller if held for more than five
seconds
•
Off: No faults
•
Steady amber: Firmware has detected an error
•
Blinking amber:Storage controller is performing POST
Reboots the storage controller forcing it to restart at the POST
process
•
Off: Identification disabled
•
Blinking blue (for 15 sec.): Identification is enabled
•
Blinking blue (continuously): Storage controller shut down
to the Advanced Configuration and Power Interface (ACPI)
S5 state
—
•
Green LEDs 0–3: Low byte hex POST code
•
Green LEDs 4–7: High byte hex POST code
Not for customer use.
—
•
Off: No power
•
Steady Amber: Link
•
Blinking Green: Activity
Back-end expansion port B
Back-end expansion port A
Get other manuals https://www.bkmanuals.com
About the SCv2080 Storage System