Dell EMC VxFlex Ready Node R840 Owner's Manual - Page 12
Browse online or download pdf Owner's Manual for Storage Dell EMC VxFlex Ready Node R840. Dell EMC VxFlex Ready Node R840 44 pages.
Print Page
System overview
LCD panel
The LCD panel provides system information, status, and error messages to indicate whether the system is functioning
correctly or requires attention. The LCD panel can also be used to configure or view the system's iDRAC IP address.
The LCD panel is available only on the optional front bezel. The optional front bezel is hot pluggable.
The statuses and conditions of the LCD panel are outlined here:
The LCD backlight is white during normal operating conditions.
l
When the system needs attention, the LCD backlight turns amber, and displays an error code followed by
l
descriptive text.
Note:
If the system is connected to a power source and an error is detected, the LCD turns amber
regardless of whether the system is turned on or off.
When the system turns off and there are no errors, LCD enters the standby mode after five minutes of
l
inactivity. Press any button on the LCD to turn it on.
If the LCD panel stops responding, remove the bezel and reinstall it.
l
If the problem persists, see "Getting help" at the end of this publication.
The LCD backlight remains off if LCD messaging is turned off using the iDRAC utility, the LCD panel, or other
l
tools.
Figure 1 LCD panel
Table 1 LCD panel features
Item
Button or
display
1
Left
2
Select
3
Right
4
LCD display
R840xd Owner's Guide
12
Description
Moves the cursor back in one-step increments.
Selects the menu item that is highlighted by the cursor.
Moves the cursor forward in one-step increments.
During message scrolling:
Press and hold the right button to increase scrolling speed.
l
Release the button to stop.
l
Note:
The display stops scrolling when the button is released. After 45 seconds of inactivity, the
display starts scrolling.
Displays system information, status, and error messages or iDRAC IP address.