Dell EMC VxFlex Ready Node R840 Owner's Manual - Page 22
Browse online or download pdf Owner's Manual for Storage Dell EMC VxFlex Ready Node R840. Dell EMC VxFlex Ready Node R840 44 pages.
Print Page
Technical specifications
Table 8 USB specifications
Front panel
Two USB 2.0-compliant ports
l
One micro USB 2.0-compliant port
l
for iDRAC Direct
Note:
The micro USB 2.0
compliant port can only be
used as an iDRAC Direct or a
management port.
One optional USB 3.0-compliant
l
port
NIC ports
The R840 system supports up to four Network Interface Controller (NIC) ports that are integrated on the network
daughter card (NDC), and are available in the following configurations:
Table 9 Supported NICs
NICs
Intel X550 2 Port 10 Gb Base-T + I350 2 Port 1 Gb Base-T, rNDC
Intel X710 DP 10 Gb DA/SFP+, + I350 DP 1 Gb Ethernet, Network Daughter
Card
Mellanox ConnectX-4 Lx Dual Port 25 GbE DA/SFP rNDC
Intel X550 Dual Port 10G Base-T Adapter, Full Height
Intel X550 Dual Port 10G Base-T Adapter, Low Profile
Mellanox ConnectX-4 Lx Dual Port 25 GbE DA/SFP Network Adapter, Full
Height
Mellanox ConnectX-4 Lx Dual Port 25 GbE DA/SFP Network Adapter, Low
Profile
Mellanox ConnectX-4 Dual Port 100 GbE QSFP28 PCIe Adapter, FH
Mellanox ConnectX-4 Dual Port 100 GbE QSFP28 PCIe Adapter, LP
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display.
The R840 system supports two 15-pin VGA ports, one each, on the front and back of the system.
Video specifications
R840 servers support the integrated Matrox G200eW3 graphics controller with 16 MB of video frame buffer.
The following table describes the supported video resolution options.
Video resolution options
R840xd Owner's Guide
22
Back panel
Two USB 3.0-compliant ports
l
Internal USB
One internal USB 3.0-compliant port
l
VxFlex Appliance
X
X
X
X
VxFlex Ready Node
X
X
X
X
X
X
X
X
X