Dell EqualLogic PS5000 Hardware Maintenance - Page 31

Browse online or download pdf Hardware Maintenance for Storage Dell EqualLogic PS5000. Dell EqualLogic PS5000 46 pages. Storage arrays
Also for Dell EqualLogic PS5000: Hardware Manual (50 pages)

Print Page

PS5000 Hardware Maintenance

Maintaining Control Modules

Figure 3-6: Installing a Control Module

After installing a control module, connect network cables to the control module,

as described in Connecting Network Cables on page 3-6. Then, if the array was

shut down, turn on power to the array.

Check the LEDs, as described in Interpreting Control Module LEDs on page 3-2.

Also, check the GUI Member Controllers window or invoke the CLI

member

command. The control module status will be

select show controllers

either

(if there is only one control module) or

active

secondary

If two control modules are installed but only one appears in the GUI or CLI, the

control module may not be properly installed. Re-install the control module. If

both control modules still do not appear in the GUI or CLI, they may not be

running the same firmware, and you should contact your array support provider.

3–11