3 Day Blinds 2 Getting Started - Page 4

Browse online or download pdf Getting Started for Window Blinds 3 Day Blinds 2. 3 Day Blinds 2 8 pages.

Print Page

VALANCE RETURN ASSEMBLY

If you did not order valance returns for your valance, proceed

to "Valance Clip Installation".

CAUTION: Do not get the glue on the painted/stained surface

of the valance. Avoid contact with skin.

• Repeat this procedure for the other end of the valance.

• Allow the glue to dry for at least 10 minutes before

installing the valance.

Proceed to "Valance Clip Installation".

| 2 & 2

" Wood & Faux Wood & Angled Slat Blinds

• Slide a valance return

clip onto each end of the

valance.

• Apply a thin coat of glue

to the mitered end of both

the valance and valance

returns.

• Slide the valance return

clip into the valance,

joining the ends of the

valance returns with the

valance by pressing the

mitered edges together

firmly for 60 seconds.

VALANCE CLIP INSTALLATION

If you ordered a blind with a valance, you will need to install

the valance clips to the front of the headrail before installing

the blind. The valance clips should be spaced equidistant

from the end brackets and each other to allow proper

support for the entire valance. Make sure the valance clips do

not interfere with any moving parts.

Back

Front

• Snap the front of the valance clip into the groove on the

back of the valance and rotate 90°.

• Clip the back of the valance clip onto the headrail, matching

the placement of the clips on the valance.

Proceed to "Blind Installation"

• There are two parts to

the valance clip, the front

which attaches to the

valance and the back

which attaches to the

headrail.