Dell PowerVault 122T LTO User Manual - Page 31
Browse online or download pdf User Manual for Storage Dell PowerVault 122T LTO. Dell PowerVault 122T LTO 40 pages. Lto autoloader
Also for Dell PowerVault 122T LTO: Handbook (28 pages), User Manual (42 pages)
Print Page
Back to Contents Page
Operating the Autoloader: Dell™ PowerVault™ 122T DLT VS80 Autoloader User's
Guide
Operator's Panel Overview
Understanding the Menu Structure
Using Cartridges
Cleaning the Tape Drive
Creating an Inventory of Cartridges
Operator's Panel Overview
The Operator's Panel consists of four LEDs, four buttons, and a 2-line by 16-character LCD screen. The Operator's Panel provides everything you need to
monitor autoloader status and to control all of its functions.
The display defaults to the Home screen. The Home screen consists of the autoloader status on the top line and the current cartridge inventory on the second
line. If the tape drive does not have a cartridge loaded, the top line displays DELL PV-122T (see
The cartridge inventory indicates all slots that contain a cartridge by displaying the slot number. Empty slots are indicated by a dash or hyphen (-).
Home Screen
An exclamation point (!) displayed in the inventory indicates that the autoloader has identified a cartridge in the indicated slot that is either an invalid catridge
type or has had a media error. These conditions can be caused by faulty media, media that has been previously written in an invalid format, or dirty read/write
heads in the tape drive. The Media Attention LED is also illuminated in this case (see
condition (see
"Exporting
Cartridges"). If these symptoms occur on multiple known good cartridges, consider cleaning the tape drive (see
Drive"). If a particular cartridge causes these symptoms repeatedly, that cartridge may be defective or invalid.
Occasionally you may see the message In Transit, which indicates:
An error condition has caused a cartridge to be left between its slot and the drive. Power cycle or reset the autoloader to clear this condition.
l
A cartridge is unexpectedly found in the Import/Export slot opening. Power cycle or reset the autoloader to clear this condition.
l
If the tape drive has a cartridge loaded, the top line displays Drive loaded. The cartridge currently loaded in the drive is indicated by an alternating black block
and the slot number. This display can also indicate that the specified cartridge is being loaded, unloaded, imported, or exported, as well as indications of read
to, write to, and so on. The autoloader status line indicates the current operation. An example of this display is shown below.
Home Screen, Drive Loaded
LED Indicators
The Operator's Panel includes four LED indicators that provide a variety of information as detailed in the following table:
LED
Color Description
Ready/Activity
Green
Illuminated when power is on. Blinking whenever there is tape drive or autoloader robotics activity.
"LED
"Home
Screen").
Indicators"). Exporting the indicated cartridge will clear the error
"Cleaning the Tape