Dell PowerVault 201S Rack Installation Manual - Page 21
Browse online or download pdf Rack Installation Manual for Storage Dell PowerVault 201S. Dell PowerVault 201S 26 pages. Dell powervault 20xs storage systems enclosure services
expander module installation
Also for Dell PowerVault 201S: Replacement Instructions Manual (14 pages), Manual (9 pages), Update (4 pages), Configuration (2 pages), Installation Manual (48 pages)
Print Page
support.dell.com
If the two rail-mounting flanges are already attached to the support rails, ensure
that the two 10-32 pan-head screws are slightly loose, allowing the flanges to
slide freely.
support rail
3.
Place the flange of the support rail assembly behind the right-front vertical rail of
the rack. Thread two 10-32 x 1/2-inch flat-head screws with a conical washer and
push them through the front vertical rail of the rack and into the two center-most
screw holes of the rail-mounting flange (see Figure 1-7). Ensure that the rail is
centered vertically within the 3-U mounting area.
Tighten the screws. Ensure that the full surface of the rail-mounting flange
comes in contact with the surface of the vertical rail.
Dell PowerVault 200S and 210S Storage Systems Rack Installation Guide
10-32 x 1/2-inch pan-
head screws (2 per
rail assembly)
Do not tighten.
rail-mounting flange
1-7