Dell PowerVault 50F User Manual - Page 42
Browse online or download pdf User Manual for Storage Dell PowerVault 50F. Dell PowerVault 50F 42 pages. Dell powervault 56f switches rack installation guide
Also for Dell PowerVault 50F: Connection Manual (38 pages), Install Manual (8 pages), Rack Installation Manual (28 pages)
2
Dell PowerVault Switch Manager User's Guide
The F_Port is the Fabric access port used
to connect an N_Port.
The FL_Port is the fabric access port used
to connect NL_Ports to the switch in a
loop configuration.
Fibre-Channel shortest path first.
A port is designated as a G_Port when it
has not assumed a specific function. A
G_Port is a generic switch port that can
operate either as an E_Port or an F_Port.
A port is defined as a G_Port, for example,
when it is not connected or has not yet
assumed a specific function in the fabric.
Hardware that connects incompatible
networks by providing the necessary
translation, both for hardware and
software.
ISL is a fiber link between two switches
ISL is online but not operational between
switches because of overlapping domain
ID or nonidentical parameters such as
E_D_TOVs.
A loop is a configuration of devices (for
example, JBODs) connected to the fabric
via and FL_Port interface card.
Multicast is used when multiple copies of
data are to be sent to designated multiple
destinations.
The N_Port is the designation of an equip-
ment port connected to the fabric.
The NL_Port is the designation of an
equipment port connected to the fabric in
a loop configuration via an FL_Port.
The POST is a series of self-tests that run
each time the unit is booted or reset.
R_A_TOV is used to time out operations
that depend on the maximum possible
time that a frame could be delayed in a
fabric and still be delivered. The value of
R_A_TOV is adjustable in 1-microsecond
increments over a range from 10 to 120
seconds.
SNMP is a TCP/IP protocol that generally
uses the User Datagram Protocol (UDP)
to exchange messages between a man-
agement information base and a
management client residing on a network.
Since SNMP does not rely on the under-
lying communication protocols, it can be
made available over other protocols, such
as UDP/IP.
The original standard for SNMP is now re-
ferred to as SNMPv1.
A trap is a mechanism for SNMP agents
to notify the SNMP management station
of significant events.
Unicast routing provides one or more op-
timal path(s) between any of two
switches that make up the fabric. This is
for a single copy of the data to be sent to
designated destinations.
Unique numeric identifier for each switch;
assigned by manufacturer.