Dell PowerVault DL2300 Setup Manual - Page 2
Browse online or download pdf Setup Manual for Storage Dell PowerVault DL2300. Dell PowerVault DL2300 2 pages. Dell powervault backup to disk appliance - interoperability guide
Also for Dell PowerVault DL2300: Installation (2 pages), Installation (2 pages), Installation (2 pages), Getting Started Manual (10 pages), Configuration (10 pages)
Print Page
Setting Up Your PowerVault DL Backup to Disk Appliance (continued)
|
5
Connecting the PowerVault DL2300 System to the PowerVault MD Storage Enclosures (Optional)
Connect the PowerVault MD storage enclosure to the PowerEdge RAID Controller
(PERC), located in the PowerVault DL2300 system:
1.
Connect one end of the SAS cable to port 0 on the PowerVault DL2300 system PERC controller.
2.
Connect the other end of the SAS cable to the IN port of the primary Enclosure Management Module
(EMM) on the PowerVault MD storage enclosure.
To locate the primary EMM, see the PowerVault MD storage enclosure Owner's Manual.
If more than one PowerVault MD storage enclosure is used, connect the SAS OUT port on the primary EMM
to the SAS IN port on the next enclosure.
NOTE:
Do not connect tape devices to the PERC controller.
|
7
Launching the DL Backup to Disk Appliance Console
Printed in the U.S.A.
PowerEdge RAID Controller
MD primary Enclosure Management Module
Indicates single path cabling. A maximum of eight
MD storage enclosures can be connected in a
single path cabling confi guration. This confi gura-
tion does not off er redundancy.
Indicates dual path cabling. A maximum of four
MD storage enclosures can be connected in a
dual path cabling confi guration. This confi gura-
tion off ers redundancy.
After the PowerVault DL Backup to Disk Appliance Confi guration
Wizard is complete, the PowerVault DL Backup to Disk Appliance
Console is displayed.
Click Launch Commvault Software to launch the backup application.
© 2012 Dell Inc.
Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc.
Microsoft® is either a trademark or registered trademark of Microsoft Corporation in the
United States and/or other countries. CommVault® and Simpana® are registered trademarks of CommVault Systems, Inc.
2012 - 09
|
6
Confi guring the PowerVault DL2300 Software
DL2300 system
MD1200 storage enclosure (optional)
MD1200 storage enclosure (optional)
MD1200 storage enclosure (optional)
MD1200 storage enclosure (optional)
|
8
Additional Information
Important Updates
Note:
Before installing any updates, complete setting up the DL Backup to Disk Appliance.
•
For latest operating system updates, go to the Microsoft website at
•
To reinstall or update Dell software, download the
Documentation
Title
Getting Started Guide
Dell PowerVault DL Backup To Disk Appliance Powered
by CommVault Simpana User's Guide
Dell PowerVault DL2300 Owner's Manual
Rack Installation Instructions
CommVault Release Notes
Turn on the components in the following order:
1.
MD storage enclosure(s)
2.
DL2300 system and monitor
The DL2300 system prompts you to enter a password.
After the password is confi rmed, the PowerVault DL Backup
to Disk Appliance Confi guration Wizard is displayed.
Click Next and follow the instructions on the screen to com-
plete the software confi guration.
update.microsoft.com.
Dell PowerVault DL Backup to Disk Appliance Recovery and Update Utility from support.dell.com/support/downloads.
Description
The Getting Started Guide provides an overview of system features, setting up your
solution, and technical specifi cations. This document is shipped with your system
and is also available at support.dell.com/manuals.
The CommVault User's Guide provides information about deploying the appliance
using CommVault and recovering the appliance from software and hardware failures.
The Owner's Manual provides information about solution features and describes
how to troubleshoot the system and install or replace system components. This
document is available at support.dell.com/manuals.
The rack documentation included with your rack solution describes how to install
your system into a rack. This document is shipped with your rack solution and is also
available at support.dell.com/manuals.
The CommVault Release Notes provides information about deploying the appliance
using CommVault and recovering.