Dell PowerVault MD3060e Series Administrator's Manual - Page 20

Browse online or download pdf Administrator's Manual for Storage Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 48 pages. Storage enclosure
Also for Dell PowerVault MD3060e Series: Hardware And Software Manual (25 pages), Installation Manual (11 pages), Getting Started Manual (10 pages), Information Update (8 pages), Rack Installation Instructions (2 pages), Setting Up (2 pages), Deployment Manual (24 pages), Administrator's Manual (35 pages), Getting Started Manual (10 pages), Deployment Manual (24 pages), Owner's Manual (40 pages), Setting Up (2 pages)

Print Page
Dell PowerVault MD3060e Series Administrator's Manual

CLI reference

This section lists all the commands available for managing your storage enclosure.

Commands listed by type

Drive commands

Blink drive

Description
Helps visually locate the specified SCSI device by initiating a blink, or ending an existing blink session.
Command syntax
secli (blink drive | blinkdrive | bd) (-a=<(SAS WWID | AdapterIndex)> [-
enc=<(WWN | EnclIndex)> [-w=<DrawerIndex>]] -d=<(WWN | EnclosureSlotIndex |
DrawerSlotIndex | Serial Number | Drive OS Path)> [-off] | -d=<(WWN | Serial
Number | Drive OS Path)> [-off] | [-h])
Parameters
Table 4. Drive commands
Parameter
-a
-enc
-w
-d
20
Description
Specify the adapter to use for the command. This
can be either SASAddress or AdapterIndex.
Specify the enclosure to use for the command.
This is either WWN or EnclIndex.
Specify the drawer index used for the command.
Specify the drive used for the command. This can
be any of the following:
•
WWN — Can be used anytime.
•
Enclosure Slot Index — Use if drawer argument
is not being used for the command.
•
Drawer Slot Index (Index of the drive in the
specific drawer)-Use if drawer argument is used
for the command.
•
Serial Number - Can be used anytime.
4