3 Day Blinds ARCH Assembly/Installation Instructions - Page 5

Browse online or download pdf Assembly/Installation Instructions for Window Blinds 3 Day Blinds ARCH. 3 Day Blinds ARCH 8 pages.

Print Page

arch over a new BLInd InSTaLLaTIon

• Attach the brackets as shown in the bottom blind's Installation

Instructions. Continue below to "Arch Over An Existing Blind

Installation".

• Starting at the top of the arch

insert slats leaving enough

room for securing mounting

screws into the bottom rail

(leave out approximately 4 - 8

slats for now).

• Attach the arch bottom rail to

the window sill using the 1

drywall screws.

• Remove and discard the wood

shims located in the bottom

groove of each vertical arch

support.

• Continue inserting the remaining

wood slats to create the

completed arch.

• Using a level, hold the partially

completed arch to the correct

position inside or outside the

window to determine where the

2" wood blind mounting

brackets will be placed for both

the arch and the blind. Using a

pencil, draw a small line on the

wall under the arch bottom rail

at both ends of the arch to

establish where the 2" wood

blind ounting brackets will be

attached.

Page 4