Dell PowerVault MD3220 Series Deployment Manual - Page 10

Browse online or download pdf Deployment Manual for Storage Dell PowerVault MD3220 Series. Dell PowerVault MD3220 Series 38 pages. Storage arrays
Also for Dell PowerVault MD3220 Series: Update Manual (32 pages), Rack Installation Instructions (2 pages), User Manual (46 pages), Deployment Manual (38 pages), Information Update (1 pages), Technical Manualbook (40 pages), Deployment Manual (38 pages)

Print Page

Connecting the Storage Array

The storage array is connected to a host using two hot-swappable RAID

controller modules. The RAID controller modules are identified as RAID

controller module 0 and RAID controller module 1.

For more information, see the Getting Started Guide.

Each RAID controller module has four SAS In port connectors that provide

SAS connections to the host or node. Each RAID controller module also

contains an Ethernet management port and a SAS Out port connector. The

Ethernet management port allows you to install a dedicated management

station (server or stand-alone system). The SAS Out port allows you to

connect the storage array to optional expansion enclosures for additional

storage capacity. For more information, see the Getting Started Guide.

Each Dell PowerVault MD3200 series storage array can be expanded to a

maximum of 120 (or 192, if enabled through the Premium Feature activation)

physical disks through a maximum of seven PowerVault MD1200 series

expansion enclosures.

NOTE:

When you connect a host server to a storage array SAS In port connector,

any Out port connector of the server's host bus adapter (HBA) can be used.

You can cable the storage array to host servers with:

•

Single path data configuration—A single path configuration allows you to

connect a maximum of eight hosts. This is a non-redundant configuration.

•

Dual path data configuration—A dual path configuration allows you to

connect a maximum of four hosts.

Choose the data configuration based on:

•

Number of hosts required

•

Level of data redundancy required

Hardware Installation