Dell PowerVault MD3860f Deployment Manual - Page 8
Browse online or download pdf Deployment Manual for Storage Dell PowerVault MD3860f. Dell PowerVault MD3860f 36 pages. Storage arrays
Hardware Installation
Before using this guide, ensure that you review the instructions in the:
•
Dell PowerVault MD3460/MD3860i/MD3860f Storage Arrays Getting Started Guide — The Getting
Started Guide that is shipped with the storage array provides information to configure the initial setup
of the system.
•
Dell PowerVault MD Series Storage Arrays Administrator's Guide — The Administrator's Guide provides
information about important concepts you must know before setting up your storage solution. For
more information, see dell.com/powervaultmanuals.
•
The Rack Installation instructions — Provides information on how to rack your system. This document
is shipped with your system.
Planning The Storage Configuration
Consider the following before installing your storage array:
•
Evaluate data storage needs and administrative requirements.
•
Calculate availability requirements.
•
Decide the frequency and level of backups, such as weekly full backups with daily partial backups.
•
Consider storage array options, such as password protection and e-mail alert notifications for error
conditions.
•
Design the configuration of virtual disks, disk groups, and DDP according to a data organization plan.
For example, use one virtual disk for inventory, a second for financial and tax information, and a third
for customer information.
•
Decide whether to allow space for hot spares, which automatically replace failed physical disks.
Connecting The Storage Array
The storage array is connected to a host using two hot-swappable RAID controller modules. The RAID
controller modules are identified as RAID controller module 0 and RAID controller module 1. The ports
on the RAID controller module and their functions are listed below:
•
16 Gbps Fibre channel Host Ports (4) – Provides FC connection to the host or node.
NOTE: When you connect a host server to a storage array FC IN port connector, any OUT port
connector of the host bus adapter (HBA) of the server can be used.
•
1 Gbps Ethernet Management (MGMT) Port (1) – Management port allows for out-of-band
management of storage array.
•
Reserved Ethernet Port (1) – Reserved port.
•
12 Gbps SAS host Ports (2) – Additional SAS Host ports.
8
2