Dell PowerVault MD3860i Series Owner's Manual - Page 33
Browse online or download pdf Owner's Manual for Storage Dell PowerVault MD3860i Series. Dell PowerVault MD3860i Series 50 pages. Storage arrays
Print Page
Figure 20. Removing and Installing a RAID Controller Module or Expansion Module
1.
RAID controller module or expansion
module
3.
release tab
Installing A RAID Controller Module Or Expansion Module
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Insert the RAID controller module or expansion module into the bay until it seats into place.
2.
Push the release lever toward the chassis until it clicks into place.
3.
Connect all the cables and SFP+ modules to the RAID controller module or expansion module.
4.
Using the MDSM, verify that the new RAID controller module or expansion module is identified.
5.
If applicable, update the firmware for the RAID controller module or expansion module.
For information about the latest firmware, see dell.com/support.
2.
release lever
33