Dell PowerVault NX1950 Configuration Manual - Page 6

Browse online or download pdf Configuration Manual for Storage Dell PowerVault NX1950. Dell PowerVault NX1950 11 pages. For vmware esx server software
Also for Dell PowerVault NX1950: Deployment Manual (34 pages), Important Information Manual (26 pages), Getting Started (49 pages), Installation And Troubleshooting Manual (48 pages), Deployment Manual (38 pages), Upgrade Manual (18 pages), Reference Manual (4 pages), Setting Up (2 pages), Using (2 pages)

Print Page
Dell PowerVault NX1950 Configuration Manual
5.  iSCSI Software Initiator Configuration on ESX Server
This section lists the steps required to configure the software initiator on the VMware ESX Server.
Connect to the ESX server/VirtualCenter using VI Client, and follow the below steps:
1. Select Configuration->Storage Adapters on the ESX server
2. Select iSCSI software adapter and click on Properties. The iSCSI initiator Properties
window appears.
3. Under the general tab select Configure tab. Select the Enabled checkbox and click OK.
Select Close.
4. Select iSCSI software adapter under storage. You should now see your iSCSI Target
name listed.
Dell Inc.
Figure 3: iSCSI software initiator tab on VI client
Figure 4: iSCSI software initiator properties window
 
6