Dell PowerVault NX1950 Configuration Manual - Page 9

Browse online or download pdf Configuration Manual for Storage Dell PowerVault NX1950. Dell PowerVault NX1950 11 pages. For vmware esx server software
Also for Dell PowerVault NX1950: Deployment Manual (34 pages), Important Information Manual (26 pages), Getting Started (49 pages), Installation And Troubleshooting Manual (48 pages), Deployment Manual (38 pages), Upgrade Manual (18 pages), Reference Manual (4 pages), Setting Up (2 pages), Using (2 pages)

Print Page
Dell PowerVault NX1950 Configuration Manual
6.2 Create Virtual Disks 
1. Right click newly created iSCSI target and select Create Virtual Disk for iSCSI Target.
The create virtual disk wizard appears next.
2. Create virtual disk: The virtual disk is created as a file residing on a formatted storage
volume (preferably formatted as an NTFS file system volume). On the create virtual disk
wizard, browse to this partition and specify a name for the virtual disk. Select Next.
3. Specify the size (in MB) of the virtual disk and click Next.
4. Provide a description for the virtual disk and click Next.
5. Specify the iSCSI target that you want to attach the virtual disk to. Select the newly
created iSCSI target name and click Add. Click OK and then click Next and then Finish to
complete creation of virtual disk.
6. The iSCSI target should now appear under iSCSI targets and the virtual disk should show
with status as idle.
Dell Inc.
Figure 9: Create virtual disk wizard
9