Dell PS6000 Hardware Maintenance - Page 20
Browse online or download pdf Hardware Maintenance for Storage Dell PS6000. Dell PS6000 50 pages. Storage arrays
Also for Dell PS6000: Hardware Manual (50 pages), Overview (7 pages), Quick Reference Manual (2 pages)
PS6000 Hardware Maintenance
3. Wait 30 seconds to allow the heads to land. (Does not apply when removing a
blank carrier.)
4. Pull the disk further from the slot and re-engage the handle. You will hear a
click. Then, pull the disk completely out of the array.
Installing Disks
Caution:
Wear electrostatic protection when handling a disk. See Using an
Electrostatic Wrist Strap on page 1-5.
Disk Installation Guidelines and Restrictions
•
Install only disks of the same type, speed, and spin rate in an array. The color
of the handle release button indicates the disk type (black for SAS; gray for
SATA).
•
Make sure the disk is oriented in the position shown in Figure 2-4, with the
handle release button to the left.
•
You can use disks with different sizes in an array. However, the smallest disk
in the array will determine how much space can be used on each disk. For
example, if the smallest disk is 400GB, only 400GB of space will be available
for use on each disk.
2–6
Figure 2-6: Removing a Disk
Maintaining Disks