Dell Storage Center SCv2020 Getting Started Manual - Page 6
Browse online or download pdf Getting Started Manual for Storage Dell Storage Center SCv2020. Dell Storage Center SCv2020 19 pages. Storage center
Also for Dell Storage Center SCv2020: Owner's Manual (42 pages), Getting Started Manual (20 pages)
Print Page
iSCSI Fault Domain Information
For a storage system with iSCSI front-end ports, gather and record network
information for the iSCSI fault domains. This information is needed to complete the
Discover and Configure Uninitialized SCv2000 Series Storage Centers wizard.
NOTE: For a storage system deployed with two Ethernet switches, Dell
recommends setting up each fault domain on separate subnets.
See the Dell Storage Center SCv2000/SCv2020 Storage System Deployment Guide
for information about setting up iSCSI fault domains.
Table 3. iSCSI Fault Domain 1
Target IPv4 address
Subnet mask
Gateway IPv4 address
IPv4 address for storage controller module 1: port 1
IPv4 address for storage controller module 2: port 1
(Four port I/O card only) IPv4 address for storage
controller module 1: port 3
(Four port I/O card only) IPv4 address for storage
controller module 2: port 3
Table 4. iSCSI Fault Domain 2
Target IPv4 address
Subnet mask
Gateway IPv4 address
IPv4 address for storage controller module 1: port 2
IPv4 address for storage controller module 2: port 2
(4-port I/O card only) IPv4 address for storage controller
module 1: port 4
6
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___