Dell TUMAE Owner's Manual - Page 27

Browse online or download pdf Owner's Manual for Storage Dell TUMAE. Dell TUMAE 47 pages. Direct-attach storage for poweredge servers

Print Page

Figure 27. MPIO properties dialog box

Verifying Multipath in Linux

For Linux, Multipath should already be configured. When connecting to the host using a SAS adapter, follow these steps to

ensure that Multipath is configured for the enclosures.

Steps

1. Run the following command to verify that the multipath is active (running):

systemctl status multipathd

2. If status is inactive, run the following command to start the service:

systemctl start multipathd

3. Run the following command to verify disk drives are listed.

multipath -ll

Connecting the enclosure