Dell 5324 - PowerConnect Switch Release Note - Page 17
Browse online or download pdf Release Note for Switch Dell 5324 - PowerConnect Switch. Dell 5324 - PowerConnect Switch 23 pages. Release notes
Modified Commands in the CLI Reference Guide
clock summer-time
Under User Guidelines add the following:
The following steps must be completed before setting the summer clock:
3.
Summer time configuration, for example: console(config)# clock summer-time recurring usa
4.
Define Timezone, for example : console(config)# clock timezone 2 zone RADL
5.
Set clock, for example: console# clock set 10:00:00 apr 15 2004
sntp anycast client enable
Update the command as follows:
Field
Current Guide
Description
The sntp anycast client enable Global
Configuration mode command enables
anycast client. To disable the polling for
SNTP broadcast client, use the no form of
this command.
sntp client enable
Update the command as follows:
Field
Current Guide
♦
User
Use the sntp client enable Global
Guidelines
Configuration mode command to
enable broadcast clients globally.
bridge address
Update the command as follows:
Field
Current Guide
Syntax
bridge address mac-address {ethernet
interface | port-channel port-channel-
number} [permanent | delete-on-reset |
delete-on-timeout | secure]
bridge aging time
Update the command as follows:
Field
Current Guide
Syntax
seconds — Time is number of seconds.
parameter
(Range: 10 - 630 seconds)
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
Change to:
The sntp anycast client enable Global
Configuration mode command enables anycast
client. To disable the SNTP anycast client, use
the no form of this command.
Change to:
♦
Use the sntp broadcast client enable
Global Configuration mode command to
enable broadcast clients globally.
Change to:
bridge address mac-address [permanent |
delete-on-reset | delete-on-timeout | secure]
{ethernet interface | port-channel port-channel-
number}
Change to:
seconds — Time is number of seconds. (Range:
10 - 360 seconds)
Subject to Change Without Notice
Page 13