Dell Brocade VDX 6740 Configuration Manual - Page 10
Browse online or download pdf Configuration Manual for Switch Dell Brocade VDX 6740. Dell Brocade VDX 6740 11 pages.
Also for Dell Brocade VDX 6740: Configuration Manual (11 pages)
Print Page
4
Configuring VCS ID and Rbridge-ID
Refer to Brocade documentation for details on VCS and ethernet fabric. The following commands shows
the steps to configure the rbridge-id and VCS id to 2 on the second switch so that it doesn't conflict with
the default value of 1 on Switch 1. VDX 6740 is in Fabric Cluster mode by default and configuration change
is not required for the mode.
sw0# show vcs
Config Mode
VCS Mode
VCS ID
Total Number of Nodes
Rbridge-Id
Fabric Status
--------------------------------------------------------------------------------
------------------------------
2
Online
sw0# vcs vcsid 2
This operation will change the configuration to default and reboot the switch.
Do you want to continue? [y/n]:y
Note: The switch will reboot.
sw0# vcs rbridge-id 2
This operation will change the configuration to default and reboot the switch.
Do you want to continue? [y/n]:y
Note: The switch will reboot.
10
SCG1020 | Brocade VDX 6740 Switch Configuration Guide for EqualLogic SANs
: Local-Only
: Fabric Cluster
: 1
: 1
WWN
HostName
>10:00:50:EB:1A:2D:F2:64*
sw0
Management IP
VCS Status
77.77.77.77
Online