Dell C7004 Quick Start Manual - Page 13

Browse online or download pdf Quick Start Manual for Switch Dell C7004. Dell C7004 27 pages. Systems

Print Page

Step

Task

Rotate the levers toward the card to seat the backplane connectors and

line card in place. Push on the knurled section of the levers until the

thumb tabs pop up and lock the unit in place.

Install a blank panel in all slots that do not have a card, and secure it

with the screws provided.

Installing the Fan Tray

The C-Series chassis contains one field-replaceable fan tray. There are two types

of fan trays that you can install: one contains six fans that run at varying speeds

depending on system temperature; the other contains six fans that run at a

constant speed. For both types of trays, air flows through the system toward the

fans (right to left) and is exhausted on fan-side of the chassis. The fan tray is

accessible from the front of the chassis.

WARNING: To ensure proper temperature and airflow control, the fan tray

must always be installed and operating properly.

NOTE: The system does not have an air filter. Ensure that you clean the

installation site and chassis regularly.

Step

Task

Slide the fan tray into the fan slot.

Gently push on the front of the tray until it stops. The fan tray should be

flush with the chassis.

Use a #2 Phillips screwdriver to secure the fan tray into place by

tightening the screws at the top and bottom of the fan tray.

CAUTION: Installing a card without fully engaging the

locking mechanism might damage the EMI seal on the card

below it when you install that card.

Installing the Hardware