Dell Dell SC Series Configuration Manual - Page 7
Browse online or download pdf Configuration Manual for Switch Dell Dell SC Series. Dell Dell SC Series 11 pages.
Print Page
2.3
Configure Global LLDP settings to disable DCB
The following commands are issued to disable dcbx-tlv and iscsi-app tlv.
sw0#configure
sw0(config)#protocol lldp
sw0(conf-lldp)#no advertise dcbx-iscsi-app-tlv
sw0(conf-lldp)#no advertise dcbx-tlv
sw0(conf-lldp)#exit
2.4
Disable Ethernet Fabric on edge ports
sw0(config)#interface TenGigabitEthernet 1/0/1-48
sw0(conf-if-te-1/0/1-48)# no fabric isl enable
sw0(conf-if-te-1/0/1-48)# no fabric trunk enable
sw0(conf-if-te-1/0/1-48)# exit
2.5
Enable Jumbo MTU
sw0(config)#interface TenGigabitEthernet 1/0/1-48
sw0(conf-if-te-1/0/1-48)# mtu 9216
sw0(conf-if-te-1/0/1-48)# exit
2.6
Enable Switchport
sw0(config)#interface TenGigabitEthernet 1/0/1-48
sw0(conf-if-te-1/0/1-48)# switchport
sw0(conf-if-te-1/0/1-48)# switchport mode access
sw0(conf-if-te-1/0/1-48)# exit
2.7
Enable link level flow control (802.3x)
sw0(config)#interface TenGigabitEthernet 1/0/1-48
sw0(conf-if-te-1/0/1-48)# qos flowcontrol tx off rx on
sw0(conf-if-te-1/0/1-48)# exit
7
SCG2013 | Brocade VDX 6740 Switch Configuration Guide for Dell SC Series SANs