Dell EMC Networking N1500 Series Firmware Upgrading Instruction - Page 17

Browse online or download pdf Firmware Upgrading Instruction for Switch Dell EMC Networking N1500 Series. Dell EMC Networking N1500 Series 17 pages. Emcnetworking switches

Dell EMC Networking N1500 Series Firmware Upgrading Instruction
Upgrade Dell EMC Networking N1500 Series Switches
## Loading init Ramdisk from multi component Legacy Image at b0000074 ...
Uncompressing Multi-File Image ... OK
boot_prep_linux commandline: console=ttyS0,9600n8 maxcpus=1 mem=1008M root=/dev/ram
mtdparts=spi1.0:1024k(u-
boot);nand_iproc.0:1024k(nboot),512k(nenv),256k(vpd),256k(shmoo),112640k(fs),16384k(diags)
ubi.mtd=fs ethaddr=00:1e:c9:e5:bd:10 quiet
Starting kernel ...
starting pid 1087, tty '': '/etc/init.d/rcS'
starting pid 1217, tty '/dev/ttyS0': '/etc/rc.d/rc.fastpath'
Mounting /dev/mtdblock4 at /mnt/fastpath...done.
Mounting tmpfs at /mnt/application...done.
Dell Networking Boot Options
============================
Select a menu option within 3 seconds or the Operational Code will start automatically...
1 - Start Operational Code
2 - Display Boot Menu
Select (1, 2)#
Extracting Operational Code from .stk file...done.
Loading Operational Code...done.
Decompressing Operational Code...done.
Uncompressing apps.lzma
SyncDB Running...
<185> Aug 21 02:06:22 0.0.0.0-0 General[fp_main_task]: unitmgr.c(6477) 1 %% Reboot 1 (0x1)
DMA pool size: 16777216
AXI unit 0: Dev 0xb150, Rev 0x01, Chip BCM56150_A0, Driver BCM56150_A0
PCI unit 1: Dev 0xb150, Rev 0x01, Chip BCM56150_A0, Driver BCM56150_A0
SOC unit 0 attached to PCI device BCM56150_A0
SOC unit 1 attached to PCI device BCM56150_A0
<186> Aug 21 02:06:43 0.0.0.0-1 General[fp_main_task]: bootos.c(195) 8 %%
Event(0xaaaaaaaa)started!
<185> Aug 21 02:06:43 0.0.0.0-1 SIM[Cnfgr_Thread ]: sim_util.c(3786) 9 %% Switch was reset
due to operator intervention.
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Applying Interface configuration, please wait ...
console>
5. Verify that the 6.5.2.9 version of firmware is loaded on the switch. The switch or stack is now ready for
normal operation. Verify the configuration and make any changes needed prior to connecting the switch to
the operational network.
console#show version
Machine Description............... Dell EMC Networking Switch
System Model ID................... N1524
Machine Type...................... Dell EMC Networking N1524
Serial Number..................... 14C24M0030LF
Manufacturer...................... 0xbc00
Burned In MAC Address............. 001E.C9E5.BA2F
System Object ID.................. 1.3.6.1.4.1.674.10895.3063
SOC Version....................... BCM56150_A0
HW Version........................ 1
CPLD Version...................... 16
Image File........................ N1500v6.5.2.9
Software Capability............... Stack Limit = 4, VLAN Limit = 512
unit active
--- ----------- ----------- -------------- --------------
1
6.5.2.9
backup
current-active next-active
6.3.3.14
6.5.2.9

End of document

Page 15
6.5.2.9