Dell EMC PowerSwitch S5148F-ON Installation Manual - Page 10
Browse online or download pdf Installation Manual for Switch Dell EMC PowerSwitch S5148F-ON. Dell EMC PowerSwitch S5148F-ON 45 pages.
Also for Dell EMC PowerSwitch S5148F-ON: Setup Manual (20 pages)
Print Page
Table 1. S5148F-ON switch LED behavior (continued)
LED
Master LED
FAN LED
PSU LED
LOCATOR LED/System Beacon
7-Segment LED for stacking
RJ-45 Ethernet Port LED
Table 2. System management Ethernet port LEDs
LED
Link LED
Port activity LED
NOTE:
There are four LEDs for each SFP28 and QSFP28 port. For each port, 100GbE or 40GbE uses only one LED,
2x50GbE uses two LEDs, and 4x25GbE or 4x10GbE uses all four LEDs.
Table 3. SFP28 port LEDs
LED
Link LED
Activity LED
10
S5148F-ON switch
Description
● Blinking yellow—Power supply failed
● Off—Switch is in Stacking Slave mode
● Solid green—Switch is in Stacking Master or Standalone
mode
● Off—No power
● Solid green—Normal operation; fan powered and running
at the expected RPM
● Solid yellow—Fan failed—including incompatible airflow
direction when you insert the PSU or fan trays with
differing airflows
● Off—No power
● Solid green—Normal operation
● Solid yellow—Power supply critical event causing a
shutdown
● Blinking yellow—PSU warning event; power continues to
operate
● Blinking green, 1.0Hz—Standby mode
● Blinking green, 0.5Hz—AC power cord unplugged
● Off—Locator function disabled
● Blinking blue—Locator function enabled
● Off—No power
● Solid green—Hex digit representing the stack unit ID
● Off—no link and no activity detected
● On—Activity on the port
● Solid yellow—10MHz activity
● Solid green—100MHz activiity
● Blinking green—1GHz activity
Description
● Off—No link
● Solid green—Link operating at a maximum speed,
autonegotiated/forced or 1G
● Solid yellow—Link operating at a lower speed,
autonegotiated/forced or 10/100M
● Off—No link
● Flashing green—Port activity
Description
● Off—No link
● Solid green—Link operating at maximum speed, 10G
● Solid yellow—Link operating at a lower speed,1G
● Flashing yellow, 1 second on/off—port beacon
● Off—No link
● Flashing green—port activity