Dell PowerConnect 3324 Release Note - Page 10

Browse online or download pdf Release Note for Switch Dell PowerConnect 3324. Dell PowerConnect 3324 11 pages. Release notes

Print Page

Management

CLI
Title
Show running config command displays
empty configuration
Using arrow keys for CLI command
history.
Authentication methods not accepted

Serial

Title
XModem support

Web-based Management

Title
Supported management browser and
platforms
Asset-tag setting

Telnet

Title
Password recovery

Configuration

Configuration files

Title
Configuration corruption between stacked
and stand-alone configurations
Security

Port Security

Title
Locked port discarding does not function
when swapping locked ports

Access Control List (ACL)

System Firmware Version 1.1.0.42
PowerConnect 3324/3348 Release Notes
Description
In the case where the default configuration has not been changed, the command
show running config results with an empty configuration.
CLI command recall (up/down arrow) may not list all commands
Not all authentication methods are accepted.
AAA authentication enable does not accept the local switch.
AAA authentication login does not keep the local switch.
Description
PowerConnect 3324/3348 supports Microsoft Windows HyperTerminal XModem.
Using other XModem software utilities is not recommended and does not guaranty
proper device functionality. For example the following error may occur:
console# copy xmodem://grm_11_02.ros image
Please download program using XMODEM.
XMODEM session has been aborted
console#
Description
PowerConnect 3324/3348 web-based management can be operated only by
Microsoft Internet Explorer Version 5.5 and above operating in Microsoft Windows
2000/XP and Netscape version 7.01 operating in Linux Red-Hat 6.0.
Asset-tag value setting is not possible from the embedded web management; it can
only be set from the CLI.
Description
Due to security reasons, password recovery is not available from a Telnet
connection, it is possible to recover password using the serial connection (see
"Password Recovery" in the PowerConnect 3324/3348 User Guide).
Description
When switching working mode from stacked mode to standalone and vice versa the
configuration file may be corrupted.
Description
The discard function is not properly checking the secure MAC listing. This is not
verified against the port number the MAC has been assigned to.
Page 7