Dell PowerConnect 8024 Configuration Manual - Page 18

Browse online or download pdf Configuration Manual for Switch Dell PowerConnect 8024. Dell PowerConnect 8024 21 pages. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Also for Dell PowerConnect 8024: Release Notes (27 pages), Release Notes (20 pages), Upgrading Firmware (24 pages)

Print Page
Dell PowerConnect 8024 Configuration Manual
4.10

Configure out of band (OOB) management port

console(config)#interface out-of-band
console(config-if)#ip address ipaddress mask gateway
console(config-if)#exit
4.11

Configure login credentials

console(config)#line telnet
console(config-telnet)#login authentication default
console(config-telnet)#exit
console(config)#ip http authentication local
console(config)#username admin password yourpassword privilege 15
console(config)#enable password yourpassword
4.12

Configure Jumbo Frames

console(config)#interface range tengigabitethernet all
console(config-if)#mtu 9216
4.13

Configure spanning tree portfast on edge ports

console(config-if)#spanning-tree portfast
console(config-if)#exit
4.14

Enable flow control

console(config)#flowcontrol
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to continue? (y/n)y
console(config)#exit
18
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs