Dell PowerConnect 8024 Configuration Manual - Page 8
Browse online or download pdf Configuration Manual for Switch Dell PowerConnect 8024. Dell PowerConnect 8024 21 pages. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Also for Dell PowerConnect 8024: Release Notes (27 pages), Release Notes (20 pages), Upgrading Firmware (24 pages)
Print Page
2.6
Configure out of band (OOB) management port
console(config)#interface out-of-band
console(config-if)#ip address ipaddress mask gateway
console(config-if)#exit
2.7
Configure login credentials
console(config)#line telnet
console(config-telnet)#login authentication default
console(config-telnet)#exit
console(config)#ip http authentication local
console(config)#username admin password yourpassword privilege 15
console(config)#enable password yourpassword
2.8
Configure Jumbo Frames
console(config)#interface range tengigabitethernet all
console(config-if)#mtu 9216
console(config-if)#exit
2.9
Enable flow control
console(config)#flowcontrol
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to continue? (y/n)y
2.10
Configure spanning tree portfast on edge ports
console(config)#interface range tengigabitethernet 1/0/1-20
console(config-if)#spanning-tree portfast
console(config-if)#exit
8
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs